CARE AND CLEANING INSTRUCTION
Please ensure appliance is disconnected from the power supply and switched off before attempting
any cleaning.
Please allow sufficient time for the appliance to cool down after use before plan to clean, at least 30
minutes.
The appliance is not designed to be dismantled by an unqualified technician.
Cleaning of the unit should only be attempted with slightly damp soapy cloth.
Care must be taken to ensure there that cloth is sufficiently dry to not leave any standing water.
After weting down with the soapy cloth. Dry with a dry paper towel.
Do not use abrasive cleaning materials.
OPERATING INSTRUCTIONS
Before use:
Insert the 4 non-slip rubber feet into the feet holes on the underside of the unit.
Always ensure that the appliance is on a level surface and stable before operating.
Before using your hot plate for the first time, turn the hot plate to the highest setting (position 5)and let
it stand 3 to 5 minutes. This allows the special pre-use protective coating to turn off. A bit of smoke
and smell is normal. Ensure nothing is on the hot plate.
DAILY USE:
Turn temperature controller between 2 and 5 and adjust during cooking as needed.
The indicator light will turn on to indicate that the relevant cooker is heating.
The indicator light on the appliance will turn off when it reaches the selected temperature.
To keep food warm:
a)
Turn the dial to 1 to maintain food at a constant warm temperature.
b) Turn the dial to OFF (
cools down.
When not in use. Be sure to turn the dial to OFF (
) and food will stay warm for up to 30 minutes. as the plate gradually
-11-
) and disconnected from the power outlet.
ENGLISH