Operation Instructions - universalblue UCSB90201-21 Manual Del Usuario

4. OPERATION INSTRUCTIONS

Before inserting the plug into an electrical outlet, make sure
that the electrical supply in your area matches that on the
rating label on the unit.
Carefully remove the heater from the plastic bag and the
carton.
Place the heater on a firm level surface, setting the master
button to "-" position plug the cord set into a AC220-240V
electrical outlet, with "BEE" sounds the "Power" light is on
and the heater will shows the room temperature.
General using
Turn the heater ON by pressing remote control the ON/OFF
button, the unit will blow the cold air.
Pressing the "MODE" button on remote control, the unit will
blow the warm air and will light on.
32