auna Arizona Sing Manual Del Usuario página 28

EN
28
Connecting the Unit to a TV
To output the video, lyrics and audio to your TV, perform the following
steps:
1. Connect the RCA video cable (Yellow) to the VIDEO OUT jack (4) and the
audio cables (White and Red) to the AUDIO OUT jacks (2 & 3) located on
the back of the jukebox.
2. Connect the opposite end of the RCA video cable (Yellow) to the VIDEO
IN jack and the audio cables (White and Red) to the AUDIO IN on your
TV.
NOTES:
• This unit can be used with or without a TV, but it is highly recommended
to use a TV in order to utilize all the features.
• Also refer to the TV's User Guide.
• To see the lyrics on the screen, you must use a CD+G disc or MP3+G
files.
Connecting to Line In Jack
1. Press the POWER button (1) on the front panel to turn the unit on.
2. Insert the 3.5 mm audio cable (not included) into the LINE IN jack (16) on
the front panel.
3. Press the MODE button (2) on the front panel to switch to AUX mode.
4. Use the controls on the connected device to begin playing audio routed
through the unit.
Connecting to Line Out Jack
This unit can be connected to another audio system for greater audio output
via 3.5 mm AUX cord (not included).
1. Plug one end of AUX cord into the LINE OUT jack (5) located on the back
panel.
2. Plug the other end of the AUX cord into the Line In jack on your separate
audio device. You may need to refer the instructions of your separate
audio device for more details.