Cleaning And Maintenance - auna Arizona Sing Manual Del Usuario

4. To listen to the recorded song, press the MODE button (2) on the front
panel to switch to USB mode, you can find the recorded song in the REC
file. Press th SKIP- (12) and SKIP+ (11) buttons to choose the song that
you want to play.
5. Press the PAIR button (9) to play the selected song.
NOTE: The recording function is available in BT, AUX, and CD mode. While
in CD mode, it can only record the songs with CD, CD-R, CD-RW, and CD+G
format, not available for MP3 format.
Using programming function
1. When the unit is on, press STOP button (10) to enter into STOP mode,
press the PROG/REPEAT button (4). The PROGRAM indicator will blink
and "01" will appear on the display indicating the first program is ready
to program.
2. Select the first track by using the SKIP- (12) and SKIP+ (11) buttons.
3. Press the PROG/REPEAT button (4) again to confirm the entry.
4. Repeat to set up to 20 tracks into memory. When done, press the PAIR
button (9) to start playback.
NOTES:
• Press the STOP button (10) TWICE to stop and clear the program.
• You can program up to 20 tracks for playback in any desired order.
If more than 20 tracks are attempted to be programmed, "FUL" will
appear in the display.
• The programming function is available in CD and USB mode.

CLEANING AND MAINTENANCE

• Disconnect the appliance from the power source when cleaning.
• If the unit becomes dusty, wipe it with a soft and dry duster.
• Use a soft cloth to clean this appliance. Do not use any wax, polish
sprays, or abrasive cleaners on the unit.
Note: Never allow any water or other liquids to get inside the unit while
cleaning.
EN
33