6. Gently press the fabric brush against the
garment, moving your arm in an up and
down motion targeting creases in the fabric.
7. Release the steam button to stop the steam.
NOTE: ensure that the fabric to be steamed is
being stretched whilst steaming for best results.
WARNING: the garment steamer generates
high temperatures of steam. Do not touch the
steam head, make sure the steamer is facing
away from you in an upright position.
8. If using the garment steamer without the
fabric brush, keep a distance of at least 5cm
between the steam head and the garment.
TO STEAM CURTAINS
1. Wash and dry curtains as directed, accord-
ing to the fabric type.
2. Hang the curtains and steam when they are
hanging in place.
3. Lightly stretch the curtain with one hand
while steaming to help remove creases
more easily.
TO STEAM UPHOLSTERY
1. The garment steamer can be used to help
freshen up upholstery, slip covers on furni-
ture and cushions from the furniture and in
the room. Before steaming, always test on a
small area of the fabric that is not visible.
2. Keeping the garment steamer in an upright
position and using and up and down motion.
Lightly steam over the fabric of your furni-
ture. cushions should be removed and held
upright for steaming. Allow cushions to dry
thoroughly before replacing on furniture.
NOTE: It is recommended that you use the
fabric brush attachment when steaming deli-
cate fabrics such as silk, this will minimise the
garment whilst steaming. For better result when
removing stubborn creases, remove the fab-
ric brush attachment from the steam head and
continuously steam over the selected area until
creases are removed.
WARNING: Always unplug the garment
steamer before attaching or detaching the fabric
brush.
NOTE: Only use attachments or accessories
provided.
NOTE: If the unit becomes noisy with a loud
humming sound and no steam is being generat-
ed, check the water level in the water tank.
WARNING: Do not use the garment steamer
directly on the body or animals.
AFTER EACH USE
Press the power button, switch the power off
•
at the power outlet and disconnect the power
cord from the power outlet.
Open the water tank inlet and (over a sink or
•
bucket) invert the water tank to empty the re-
maining water from the tank.
Stand the garment steamer on its base, in an
•
upright position, and allow to cool.
EN