Items Supplied; Proper Use; Technical Data; Before Starting The Equipment - EINHELL TE-VC 2025 SACL Manual Del Usuario

20. Filter cage
21. Safety float valve
22. Electric tool adapter
23. Crevice nozzle
24. Pleated filter with cover
25. Foam filter
26. Upholstery nozzle
27. Collection bag
28. Handle
29. Air regulator
30. 4 x Washers for fitting the wheels
31. 2 x Split pins for fitting the wheels
32. 2 x Covers for fitting the wheels
33. Axle for fitting the wheels
34. Hook for cable store
35. Suction tube holder
36. Screw for fitting the carry-handle

2.2 Items supplied

Please check that the article is complete as
specified in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suffocating!
•
Flexible suction hose
•
Electric tool adapter
•
Dirt bag
•
Foam filter
•
Upholstery nozzle
•
Crevice nozzle
•
Combination nozzle
•
Handle
•
Pleated filter with cover
•
Suction tube, telescopic
Anl_TE_VC_2025_SACL_SPK8.indb 29 Anl_TE_VC_2025_SACL_SPK8.indb 29
GB
•
Covers for fitting the wheels (2x)
•
Axle for fitting the wheels
•
4 x Washers for fitting the wheels
•
2 x Split pins for fitting the wheels
•
2 x Wheels
•
2 x Castors
•
Coarse filter
•
Push bar
•
2 x screws for push bar assembly
•
2 x fastening screws for push bar assembly
•
Two screws for fitting the carry-handle
•
Carry-handle
•
Original operating instructions

3. Proper use

The wet and dry vacuum cleaner is designed for
wet and dry vacuuming using the appropriate
filter. The equipment is not suitable for the vacu-
uming of combustible or explosive substances.
Wet and dry vacuum cleaners to dust class L
are only allowed to be used for dry vacuuming of
harmful dusts with an exposure limit value greater
than 1 mg/m³ (dust class L) using the appropriate
pleated filter.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.

5. Before starting the equipment

Warning!
Before you connect the equipment to the power
supply make sure that the data on the rating plate
are identical to the supply voltage.
The equipment may be connected only to a
shock-proof socket-outlet.
- 29 -
30.11.2021 07:35:21 30.11.2021 07:35:21