Descargar Imprimir esta página

Mitsubishi Heavy Industries eco touch RC-EX1A Manual De Instalación página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 144
Note: Connection to personal computer
It can be set from a personal computer via the USB port (mini-B).
Connect after removing the cover for USB port of upper case.
Replace the cover after use.
If dust, insect, etc. enters, it could cause electric
shocks or breakdown.
Special software is necessary for the connection.
For details, view the web site or refer to the engineering data.
Do not connect to a personal computer
without using the special software.
Do not connect the personal computer to the USB
simultaneously with other USB devices.
It could cause malfunction or breakdown of R/C or
personal computer.
Note: Initializing of password
Administrator password (for daily setting items) and service password (for installation, test
run and maintenance) are used.
○ The administrator password at factory default is "0000". This setting can be changed
(Refer to User's Manual). When the administrator password is forgotten, it can be
initialized, if the [Highpower] and the [Energy-saving] buttons are pushed simultaneously
for 5 seconds on the administrator password input screen.
○ Service password is "9999", which cannot be changed.
When the administrator password is input, the service password is also accepted.
All manuals and user guides at all-guides.com
— 8 —
USB port
Cover

Publicidad

loading

Este manual también es adecuado para:

Eco touch rc-ex1n