Automatic Washing Function Setup; The Pre-Brewing Function Setups; Pre-Grinder Powder Function Setups; Adjusting Function Of The Coffee Temperature - Viesta Eco Pro 200 Manual Del Usuario

Version: 8.0
KEN001KVA 26.06.2017

4.3 Automatic washing function setup

Press down the menu or ok key, then press the down key to select the setups of
automated washing. The next step is to repress the menu or ok key, the screen will present:
"open or close". Please make your choice and press the "exit" key.
Instructions: While the automated function is on, the coffee machine will have self-cleaning
process automatically after the self-examination. While the automated function is off, the
coffee machine will not have self-cleaning process after the self-examination.

4.4 The pre-brewing function setups

Press down the menu or ok key, then press the down key to select the setup of the
pre-brewing, next step is to press the menu or ok key again, the screen will present: "open
or close". Please make your choice and press the "exit" key.

4.5 Pre-grinder powder function setups

Press down the menu or ok key, then press the down key to select the setup of the
pre-grinder powder, the next step is to repress the menu or ok key, the screen will present:
"open or close". Please make your choice and press the "exit" key.
Instructions: While the setup of the pre-grinder powder is on, during the process of the first
brewing cup of coffee, the coffee machine has already stored the powder for next cup.
Thus you could enjoy the instant coffee brewing. While the setup of the pre-grinder powder
is off, the coffee powder grinding process only serve when you press the brewing button, it
won't store the powder for next cup.

4.6 Adjusting function of the coffee temperature

Press down the menu or ok key, and then press the down key to choose the temperature of
coffee. Repress the menu or ok key, the screen will show: "high, medium and low", please
choose what you need, then press the "exit" key.
4.7 Setting the water hardness
Press the Menu / OK button, then the down button to change the settings for the water
hardness. There are 4 degrees of hardness. For further information, please refer to chapter 8.

4.8 Key-tone setups

Press down the menu or ok key, and then press the down key to choose the setting of
key-tone. u or ok key, the screen will show choice of "close and open", please make you
choice and exit.
4.9 Signal sound setups
Press down the menu or ok key, and then press the down key to choose the setting of signal
sound. Repress the menu or ok key, the screen will show you choice of "close and open".
Please make you choice and exit.
4.10 Energy-saving countdown setups (Standby timer
Press menu or ok key, and press the down key to choose the required function, then repress
the menu or ok key, then the display screen will prompt you "30 min,60 min,120min and close",
please make your choice and exit. Instructions: leaving the machine unused for 30/60/120 min,
the machine will enter the energy- saving mode automatically.
Remarks: in the mode of energy-saving, if you need to wake-up the machine, just press any
button on the control panel, the machine will on self-examination process first.
When self-examination finished, it enters into the heating mode. At the moment, the display
screen will show "heating". The words "ready for use" will be shown on the screen when
heating process is completed.
[ EN p. 11 ]