Technical Specifications - Hudora Octagon 70 Instrucciones De Montaje Y De Uso

EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the pro-
duct. Therefore, please store them and the packaging carefully in case questions arise in the
future. Please always include these instructions when handing on the product to a third party.
This product must be assembled by an adult. This product is designed for private/domestic use
only. This product is not designed for commercial/industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and use for the
purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Nest Swing Octagon 70 | 90 | 110
Item No.: 72176 | 72167 | 72168
Maximum carrying capacity: 120 kg
Dimension: 70 cm Ø | 90 cm Ø | 110 cm Ø
Minimum age for use: 3 years
Purpose: Device powered by muscle power, for swinging in a sitting or
lying position.
If you have assembly problems or would like further information on the product, we have all you
need and more at http://www.hudora.de/.
CONTENTS
1 x Nest swing (cf. part list on page 2)
1 x These instructions
Other parts which may be included with the delivery in some circumstances are not
required.
SAFETY INSTRUCTION
• WARNING! Only for domestic use.
• WARNING! To be used under the direct supervision of an adult.
• WARNING! Not suitable for children under 36 months. Danger of falling!
• WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard. Small
parts. Choking hazard.
• WARNING! Suitable for outdoor and indoor use!
• The owners of the swing as well as the competent supervisory personnel are responsible for
ensuring that all users follow the instructions in the operation manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manu-facturer specifi-
cations.
• No one is permitted to gain access to the swing area during use.
• Never stand or kneel on the swing.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences, clothes-
lines).
• Make sure that you have a safety clearance of at least 2 m (front and back) beyond the maxi-
mum reach of the swing and make sure the ground is level and shock absorbing (e.g. grass)
without any sharp edges or pointed objects, obstacles, inclines, levels, steps or hard surfaces
(e.g. concrete) etc.
• Clearance to stationary components on the side, such as the swing scaffolding must be at
least 40 cm.
• Swinging components, such as a neighboring swing must be placed at a distance of at least
60 cm.
• Maximum raised height must not exceed 2.5 meter as measured from the ground.
• In idle mode, the swing must be at least 40 cm and maximally 60 cm from the ground.
• You should never install a swing in such a way that the user could be blinded by sun rays.
• When permanently irradiated with UV light, the material ages significantly faster. To avoid
premature aging and thereby extend the service life, you should always store the product
in a dry and dark place when not in use. Do not permanently expose the product to wind,
moisture, extreme temperatures or sunlight.
All images are examples of the design.
INSTRUCTIONS ON ASSEMBLY
Prior to installation, carefully select and check the location where you will install the swing.
Please make sure that the swing carrier is adequately stable. Please also take into account that
swinging produces centrifugal forces that can put a lot of strain on the swing carrier. Please
consult an expert (statics expert, architect, carpenter) and ask how much load your swing car-
rier can tolerate.Suspension connectors shall be of a design that will prevent unintentional dis-
connection. After removing the product from its packaging, please check it for completeness.
Spread out the nest (5) of the swing on the floor so that the HUDORA logo can be read facing
upwards. Insert part of the foam-sheathed tubular frame (1) into each of the tunnel loops of the
nest. Make sure that a straight tube end matches up with a tapered tube end in each case. The
tubes are not connected together yet. (Fig. 1) First attach the two swing cables (6). One swing
cable is mounted on each side of the nest swing at the front and back. Proceed as follows: First
place one of the two connecting elements (2) located at the end of the cable with side B on the
straight tube end. Now insert the tapered tube end from the other side (side A) through the
connecting element into the straight tube and connect them with the push buttons. Do the
same with the second cable end of the cable on the same side. Then attach the second cable
to the opposite side of the nest swing in the same way. (Fig. 2) Now you can hang up the fully
assembled nest swing on a suitable swing support using the retaining rings (3).
HANGING DEVICE AND ADJUSTMENT
The hanging points must be at least as far apart as the swing seat + 100mm. The swing is packa-
ged with two ropes and adjustment eyelets (4), so that the height of the swing can be variably
aligned with any suitable hanging device. The swing rope (6) can be lengthened or shortened by
pushing or pulling it through the adjustment loops (4). The hanging swing can now be individu-
ally adjusted. No one should sit on the swing while making the adjustments. When extending
or reducing the length of the swing ropes please make sure that the ropes remain equally long
at all times. If the lengths of the ropes differ, this will lead to circular pendulum movements of
the swing. Make sure that swing is set up in such a way that the person using the swing cannot
reach the ground with the tips of his or her toes. If in doubt, perform a few gentle test swings
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the
product for damage or traces of wear and tear before and after each use. Do not make any struc-
tural changes. For your own safety, please use original spare parts only. These can be sourced
from HUDORA. If parts become damaged or if sharp edges or corners should develop, the pro-
duct may not be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected from the elements, cannot
be damaged, and cannot injure anyone.
You should also replace all the plastic parts after a maximum of 5 years to prevent a possible
failure of these parts.
Check the product for damage or traces of wear and tear before and after each use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear.
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
• to check swing seats, chains, ropes and other means of attachments for evidence of deterio-
ration
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point in your
area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as
much effort into rectifying them. You can find numerous information on the product, replace-
ment parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.
.
5/12