Generalities; Warnings And Safety; Care Of Documentation, Warranties And Responsibilities; Manuals - Orkli OSKOL-150 Manual De Usuario

1.

GENERALITIES

OKSOL-150 is an integrated solar collector that uses thermal solar technology to product Domestic Hot Water. A single
element integrates the absorber, forced recirculation system and DHW accumulator for 150 litres of water.
OKSOL-150 uses photovoltaic solar technology to power the recirculation pump
system, not requiring an independent supply.
Competitive Advantages
• Appearance: attractive design. In harmony with its surroundings.
• Integrated, compact: contains all necessary elements in a single package.
• No installation: easy to install, only need to connect water inlet and outlet.
• Roof architectural integration: not visible, as the entire system is below the collector.
• Autonomous system: no external power supply required.
• Non-breakable: knock and high pressure resistant material. Facilitates installation, avoiding accidents.
If you would like further information about our product, please don't hesitate to contact our technicians or write to us at
solarorkli@orkli.es.
2.

WARNINGS AND SAFETY

Warnings:
• In the event of leaks from the system, close the system inlet valve and contact the installer immediately.
• The solar system is protected against freezing via a thermal fluid. Only use the thermal fluid provided by Orkli S. Coop.
• Verify minimum temperature at system location and fill with the appropriate amount of thermal fluid (described in
installation manual).
• This document forms part of the solar system and should be kept in good condition. In the event of loss or destruction,
contact your supplier for its renewal.
• The solar system that you have just received should be in perfect condition. If any defects or defective materials are
evident please contacts your installer.
• The solar system should be installed and commissioned by a professional installer. The installer should sign the warranty
document. The installer is responsible for installation conformity and start-up in accordance with applicable regulations.
• Contact with heat transfer fluid conduits carries with it the risk of severe burns; as such components reach very high
temperatures in solar operating mode.
Safety:
• Do not install the solar system on flat or inclined roof without abiding by general works rules.
• Do not alter safety valve settings. Verify their correct operation.
• Do not make changes to the solar system, its components, or replace parts of the system without prior authorisation from
Orkli S. Coop.
• Do not discard or allow excess heat transfer fluid to evaporate. Do not leave within reach of children.
• Do not interconnect or drill the solar system's interior circuit.
3.

CARE OF DOCUMENTATION, WARRANTIES AND RESPONSIBILITIES

3.1 Manuals

• Keep these operating instructions, and all other applicable documentation, so that they are available whenever
necessary.
• We shall not be liable for any damage arising from non-compliance with these instructions.
If you move home or sell, provide the documentation to the new owner.

3.2 Factory warranty and responsibilities

In accordance with the terms of Law 23/2003 of 10 July on Warranties in the Sale of Consumer Goods, Orkli S. Coop.
is responsible for any non-conformities that arise during a period of FIVE YEARS for the collector and all its elements
and TWO YEARS for the circulation pump from the date of delivery. The solar system that you have just received
should be in perfect condition. If any defects or defective materials are evident please contacts your supplier. The claim
period is 24 hours following delivery.
14
All manuals and user guides at all-guides.com
®
which makes it a totally autonomous