Mlog Im100 Status Check Via Led - Messko MLog IM50 Instrucciones De Servicio

3 Basic operation
Function: Check number of alarms
Action
Press „DISPLAY
ON" button longer
than 2 seconds
3.3

MLog IM100 status check via LED

Function: Check battery status
Action
Press „DISPLAY
ON" button longer
than 2 seconds; than
press „DISPLAY ON"
button shortly
Function: Check operation mode and memory status
Action
Press „DISPLAY
ON" button longer
than 2 seconds; than
press „DISPLAY ON"
button shortly
Event
Device analyses shock event
22
MLog display Home menu
Alarm Entries
Number of limit value
exceedings is displayed
LED
BATTERY (yellow)
5 seconds flashing
off
LED
ACTIVE EVENT/
(green) ALARM(red)
lights 3
off
seconds
lights 3 lights 3
seconds seconds
3 seconds
off
flashing
3 seconds 5 seconds
flashing flashing
Suggestion
If necessary, read the MLog data via the Analyser
software in order to analyse the alarms .
Result
Battery status is „Low";
Battery status is sufficient.
A prognosis of the remaining recording
duration can be called up via display or
via MLog Analyser .
Result
Operation mode
ready for
recording
no
recording
recording in
progress
recording in
progress
LED EVENT/ALARM (red)
1x flashing
Suggestion
Renew
batteries
Memory status
Memory empty
Read out
Log Book via
Log book in
MLog Analyser
memory
and possibly
delete it
no alarm in Log
book
Check Log
minimum one alarm
Book via MLog
in Log book
or Analyser
BA3431002/04 ES-EN
Suggestion