Kenmore 6800 Manual De Uso Y Cuidado página 8

3.
Press POWER
Press POWER button to turn on the dryer.
4.
Select desired cycle
Select the desired cycle for your load. See "Cycle Guide" or
"Control Panel and Features".
5.
Set cycle settings
The default cycle settings will illuminate based on the cycle
selected. See "Cycle Guide". For some cycles, you may select
alternate settings by pressing the button for that setting.
NOTE: Not all options and settings are available with all cycles.
8
Dry Temp (for use with Time Cycles only)
Press the Dry Temp button to change the drying temperature from
the default setting.
Dry Level (for use with Auto Cycles only)
Normal Dry Level is a good starting point for optimal energy
savings.
You can select a different Dry Level, depending on your load, by
pressing the button for More, Normal, or Less. Selecting More,
Normal, or Less automatically adjusts the Dry Level at which the
dryer will shut off. Once a Dry Level is set, it cannot be changed
without stopping the cycle.
Auto Dry cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is used
for a starting point for Auto drying. Less Dry removes less moisture
and is used for loads you may want to put on a hanger
to complete drying.
Wrinkle Guard™ feature
Get up to 60 or 150 minutes for models with two choices (90
n
minutes for models with only one choice) of heat-free, periodic
tumbling at the end of a cycle. Press the WRINKLE GUARD™
button to turn On or Off at any time before the cycle has
ended.
The WRINKLE GUARD™ feature is preset to "Off". If selected
n
for other cycles, the WRINKLE GUARD™ feature setting will
remain "On" the next time that cycle is selected.
6.
Select cycle options (if desired)
Press appropriate button for selected options, if desired. For
Time Cycles, press More Time if you want to increase the cycle
length, or press Less Time if you want to decrease the cycle
length. Less Time and More Time options are available with
Time Cycles only.
NOTE: Not all options and settings are available with all cycles.