Part List - Cembre CPP-0 Manual De Uso Y Mantenimiento

ENGLISH
2. INSTRUCTIONS FOR USE
2.1) Setting
Place the pump on a fl at surface so as to rest the whole base on the ground.
This position will give the necessary stability during the operation.
The ambient working temperature must not exceed 50 C° (120° F).
The working environment must be free from corrosive chemicals, oils and greases.
Before tool operation ensure that the air pressure is between 6 and 8 bar (87 ÷ 115 psi): absolutely
do not use the pump if the air pressure exceeds 8 bar (115 psi).
2.2) Operation
(Ref. to Fig. 3 a-b-c)
Press the pedal (06) on "PUMP" side to commence the build up of pressure.
Continue pumping until completion of the operation (dies closing in case of compression head;
full cable cut in case of cutting head; etc).
Note: for crimping heads, it is recommended to continue pumping until the maximum pressure
valve is actived and a repetitive "click" is heard.
To release oil pressure in the pump circuit (and therefore reset the head or blade in the rest posi-
tion) depress pedal on "RELEASE" side. To halt the operation at any stage, or to stop the pump and
maintain the oil pressure, release pedal (06).
2.3) Storage
After the completion of the work, release the oil pressure and disconnect the air supply.
Coil the hose around the casing and cover the pump, to protect from dust. Store the pump in a
clean, dry enviroment.

3. PART LIST

(Ref. to Fig. 6)
Code N° Item
6019029 01 OIL INLET VALVE
6160115 02 PUMP BODY
6019030 03 PRESSURE RELEASE VALVE
6800066 04 OIL FILLER PLUG
6550051 06 FOOT PEDAL
6631120 07 GUARD
6019035 08 PIVOT PIN
6019031 09 COVER PLATE
The guarantee is void if parts used are not Cembre original spares.
When ordering spare parts always specify the following:
- code number of item
- name of item
- type of pump
- pump serial number
4. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
DESCRIPTION Qty Code N° Item
1 6019028 10
1 6019032 11
1 6650090 12
1 6019025 13
1 6720090 14
1 6650052 15
1 6019027 16
1 6019033 17
DESCRIPTION
AIR INLET VALVE
HEAD
COUPLER
ANTI-RETURN VALVE
RESERVOIR
AIR COUPLER
MAX PRESSURE VALVE
CYLINDER
4
Qty
1
1
1
1
1
1
1
1