Adavnced Setting With Fully Automatic Wireless Flash; Multiple Master Unit; Ettl Shooting Flash Ratio A:b - Hahnel MADUS 600RT Manual De Instrucciones

All manuals and user guides at all-guides.com
Advanced setting with fully automatic wireless flash
With the wireless system the following functions set on the master unit
will automatically be adjusted on the slave unit. For this reason you
do not need to operate the slave unit (s) and can operate it from the
master in the same way as normal flash photography.
• Flash Exposure Compensation <
• Flash Exposure Bracketing <
• Flash Exposure Lock (Page 17)
• High-Speed Sync < > (Page 18)
• Manual Flash (Page 19)
• Multi / Stroboscopic Flash (Page 20)

Multiple Master Unit

You can use two or more cameras with master flash units on each to
change camera shooting while keeping the same lighting setup (slave
units) in wirelesss flash photography.
• All Master / Slave devices must be reset to open channel
ETTL: Shooting Flash Ratio A:B
You can divide slave groups into two A and B groups and adjust flash
ratio. The total output of A and B will be automatically contolled to a
standard exposure.
• Second Curtain Sync - is only enabled when using the Viper TTL
Transmitter
SLAVE
GROUP A
Modus 600RT
> (Page 16)
> (Page 17)
FEB
MASTER
SLAVE
GROUP B
1. Setting the flash groups of
slave unit
• Set the flash as slave unit
• Press Function Button 3 <
> and choose <A>
Gr
or <B>
• Set one slave unit as <A>,
the other as <B>
2. Setting < MENU >
• Step 2 to Step 4 are set on
the master unit.
• Press the Function Button 4
< > on the master
MENU 1
unit so that <
MENU 2
displayed
> is
27