Wireless Settings; Master Unit Setting; Slave Unit Setting - Hahnel MADUS 600RT Manual De Instrucciones

Idiomas disponibles

All manuals and user guides at all-guides.com

This product supports optical control wireless flash applications

and functions as either a master or a slave unit. As a master

unit, it can control Canon speedlites e.g. 580EXII, 600EX-RT

optically. As a slave unit, it can receive optical signals from Canon

speedlites e.g. 580EXII, 600EX-RT and from Canon cameras built

in flashes in wireless mode e.g. 7D/60D/600D.

• You can set up one, two or three slave groups for E-TTL II autoflash

shooting. With E-TTL II autoflash, you can easily create various

lighting effects.

• Any flash settings (of flash exposure compensation, high-speed

sync, FE lock, FEB, manual flash, Multi flash) on the master unit will

be automatically sent to the slave units. So the only thing you need

to do is to set the master unit to ETTL mode without any operation

for the slave units at all during the shooting.

• This flash can work in ETTL autoflash, M manual flash, and Multi

stroboscopic flash modes when set as a master unit.

Positioning and Operation Range

Indoors

SLAVE

Outdoors

MASTER

• Even with multiple slave units, the master unit can control all of them

via wireless.

• In this user manual, "master unit" refers to the speedlight attached to

the camera and "slave unit" will be controlled by the master unit.