Use & Operation - Honeywell CL202PEU Manual De Instrucciones

USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. When power button is pressed, the fan will automatically
activate. The cooler will start automatically at medium speed. After a few seconds the speed will
switch to low. To turn the unit off, press the button again.
SWING
Press the button until the indicator light is illuminated on the
control panel. Horizontal Air Flow -The louvers will begin to move left to
right automatically. Vertical Air Flow - You can manually adjust the louvers
Louver
Movement
to change up and down airflow.
TIMER
Press the button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord
is unplugged from electrical socket). The function allows you to program the unit for up to
7 hours of use.
SPEED
Press the button repeatedly to change the speed between 3 (High) - 2 (Medium) - 1 (Low).
EN 2