Andis PFS-1 Manual Del Usuario página 29

reSURGE
SHAVER MAINTENANCE
CLEANING & DISINFECTION
Cleaning and disinfection after every use is
necessary in order to maintain optimal
cleanliness, performance and comfort from
your shaver. You may need to replace the
foil head if you notice any decrease in
cutting performance after following the
below maintenance steps.
1. Grasp the foil head on both sides and
gently lift it off of the shaver
2. Gently tap the base of the foil head on a
flat surface so that the hair inside falls
out. Do not remove the individual foils
or they may accidentally be damaged.
3. Remove the cutters from the shaver and
gently brush away any hair.
4. Rinse away any remaining hair and
debris from the foil head and cutters
under running water.
5. To disinfect, spray the foil head and
cutters with Andis Cool Care Plus and let
sit for 10 minutes.
6. Wipe off any remaining residue and
replace the cutters and foil head.
CREATE YOUR WAY.
™
™ AND IS.CO M