Connect; Hdmi Connection For Image Projection; Usb-C Connection For Image Projection - Philips PicoPix Max One Manual De Usuario

3 Connect

Notice
You need to connect the projector to
an HDMI or USB-C device, so that the
projection screen can show images.
Make sure all devices are disconnected
from the power outlet before establishing
or changing any connections.
HDMI connection for image
projection
Connect a playback device (e.g. a Blu-ray
player, gaming console, camcorder, digital
camera or PC) to the projector through HDMI
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
Using an HDMI cable, connect the HDMI
1
connector on the projector to the HDMI
output on the playback device.
HDMI
2 The projector automatically switches to
HDMI input when HDMI connection is
made. The projection screen shows images.
• If the projection screen does not show
images, select HDMI input manually. Press
on the remote control to access input
source list, then select HDMI.
Connect
USB-C connection for
image projection
Connect a USB-C device (e.g. a mobile phone,
tablet or laptop) to the projector through USB-C
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1
USB DC
2
•
Notice
Using a USB-C cable, connect the
connector on the projector to the USB-C
port on the playback device.
HDMI
The projector automatically switches to
USB-C input when USB-C connection is
made. The projection screen shows images.
If the projection screen does not show
images, select USB-C input manually. Press
on the remote control to access input
source list, then select USB-C.
The projector supports stereo audio
format only. If no audio from the
playback device is heard on the
projector, check that the audio output
format is set to stereo on the playback
device.
USB DC
7