BaByliss PRO GOLDFX FXBDG1E Manual Del Usuario página 9

Ocultar thumbs Ver también para GOLDFX FXBDG1E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
low the dryer to cool for 10 to 15
minutes before restarting. Make
sure air vents are clean, by follow-
ing the steps below.
1. Remove intake filter from back of
dryer by twisting counterclockwise.
2. Reach through opening, and
press the mesh screen to release
it from the filter (Fig. 1).
3. Visually inspect the filter to
make sure no hair is caught (Fig.
2). Rinse the mesh screen ONLY
under running water to clear any
debris. Repeat as needed, or use
a stiff bristle brush for any diffi-
cult buildup.
4. Make sure the mesh screen is free
from any debris and completely
dry. Place screen into bottom
part of removable intake filter
(Fig. 3).
5. Press with your finger around the
edge of the screen to lock mesh
screen in place (Fig. 4).
DEUTSCH
Lesen Sie zuerst die
Sicherheitshinweise.
LpA (dB(A))
PROFESSIONELLER DIGI-
TAL-HAARTROCKNER
EIGENSCHAFTEN
• Schneller Motor (23500 U/min)
EDM TECHNOLOGY
• Starke 2200 Watt Leistung
• Leichtgewicht 420 g
• Lange Betriebszeit von bis zu
10.000 Stunden
• Metallisch strukturierter Griff
• Luftstromgeschwindigkeit: 190
km/h
• Luftausstoß: 73 m3/h
• Luftdruck 2035 Pa
• Trocknungskoeffizient: trocknet
6,1 Gramm Wasser in einer
Minute
• Zentraler Ionengenerator
• 2 Geschwindigkeits- und 2
Temperaturstufen
• Kaltlufttaste
• Turbofunktion
• 3 Zentrierdüsen + 1 Kammauf-
satz
• Diffusor
• Rückseitiger Filter abnehmbar
SCHALLDÄMPFER
• Aufhängeöse
• Hedderfreies Netzkabel von
2,75m
9
73

Publicidad

Tabla de contenido
loading

Tabla de contenido