Technical Specification - Apex Sedens 500 Manual De Usuario

Sedens500/English

10. Technical specification

Item
Power Source
Power consumption
Device Dimension (L x W x H)
Device Weight
Environment
Classification
Pressure Range
Cycle Time
Battery Pack
Battery Operation Time
Battery Recharge Time
Cushion
Dimension (L x W x H)
Weight
Max. Weight Capacity
NOTE :
1. The battery performance may be reduced if the device is stored in a hot environment.
2. Consult the distributor or EU representative for other technical documents.
3. Please follow national requirements to dispose of the unit properly
4. The manufacture reserves the right to change product specification without prior notice.
DC12V, 1250 mA by Adaptor
12V DC, 1150 mA
25 x 12.2 x 5.7cm or 9.8" x 4.7" x 2.2"
1.0 kg or 2.2lb (battery and adaptor included)
Atmospheric
700 hPa to 1013.25 hPa
Pressure
Operation: 5°C to 40°C (41°F to 104°F)
Storage: -10°C to 45°C (14°F to 113°F)
Temperature
Shipping: -10°C to 45°C (14°F to 113°F)
Operation: 30% to 75% non-condensing
Storage: 10% to 75% non-condensing
Humidity
Shipping: 10% to 90% non-condensing
Type BF, Class II, IP2X; IP22 (with carrying bag)
Applied part: Air Seat Cushion
Not suitable for use in the presence of a flammable
anaesthetic mixture (No AP or APG protection)
Five selectable settings
10, 15, 20 minutes
3.78V Li-ion Battery x2 (2.95Ah typical)
(recommended type HOVANOX METAL, SDI-30B-2S1P )
Approx. 12 hours
Approx. 4.5 hours
43 X 43 X 10.2 cm or 17" x 17" x 4"
1.1 kg or 2.4lb
120 kg
Specification
Specification
15