6) Distance (DIST)
Measure the distance from the beginning of the exercise to the stop of the
exercise.
Measuring range: 0.0~99.9KM (ML), return to zero after single item
overflow.
7) Calories (CAL)
Measure the calories (CAL) consumed from the start of the exercise to
the stop of the exercise.
Measuring range: 0.0 ~ 9999 calories, return to zero after a single item
overflows.
8) STROKES/MIN
Measure the strokes per minute during exercise.
9) Sleep
If there is no motion signal and heart rate signal input within 4 minutes,
and no key is pressed, the IC enters the SLEEP mode. The LCD display
turns off after entering sleep mode.
10) Wake up
When the distance signal, mode switching signal, setting signal and reset
signal are input, the system starts to work, while the current distance
signal and keystroke signal are only used for awakening, not for speed or
mode switching.
11) Voice Prompt
Long "BI" sound (1s) when powered on;
There will be a "BI" sound every time you press a key; Long press does
not sound. When the set time, distance and calorie are reset to zero, there
will be 4 beeps of "BI-BI-BI-BI", which will stop when the prompt
sounds are not pressed, and only the prompt sounds will stop when the
next key is pressed, and the key function will not be executed.
18