Making Your First Recording; Primera Grabación - Samsung SC-D453 Manual De Instrucciones

Tabla de contenido

Publicidad

ENGLISH
Basic Recording

Making your First Recording

1. Connect a power source to the
Camcorder. (see page 20)
(A Battery pack or a AC Power
adapter) Insert a cassette.
(see page 36)
2. Remove the Lens cover.
3. Set the Power switch to CAMERA.
Open the LCD screen.
I
Set the Mode switch to TAPE.
I
Make sure that STBY is displayed.
If the write protection tab of the
I
cassette is open(set to save), STOP
and Protection! will be displayed.
Release the write protection tab to
record.
Make sure the image you want to record appears on the LCD screen or
I
Viewfinder.
Make sure the battery level indicates that there is enough remaining power
I
for your expected recording time.
4. To start recording, press the Start/Stop button.
G is displayed on the LCD screen.
REC
I
To stop recording, press the Start/Stop button again.
STBY is displayed on the LCD screen.
I
[ Note ]
Detach the Battery pack when you are finished recording to prevent
unnecessary battery power consumption.
All manuals and user guides at all-guides.com
Grabación básica
Primera grabación
1
4
Si la pestaña de protección del casete está abierta (protegida), aparecerá
I
STOP y Protection ! <Protección !>. Libere la pestaña de protección
contra escritura para grabar.
Asegúrese de que la imagen que desea grabar aparezca en la pantalla
I
LCD o en el visor.
Asegúrese de que el nivel de la batería indique que tiene suficiente
I
energía para grabar durante el tiempo deseado.
4. Pulse el botón Start/Stop para empezar a grabar.
Aparece REC G en la pantalla LCD.
I
Para detener la grabación, pulse de nuevo el botón Start/Stop.
Aparece STBY en la pantalla LCD.
I
[ Nota ]
Retire la batería al terminar de grabar para evitar un consumo innecesario de la
misma.
ESPAÑOL
1. Conecte a la cámara a una fuente de
2
alimentación. (Consulte la página 20.)
(Una batería o un adaptador de CA.)
Introduzca un casete.
(Consulte la página 36.)
2. Retire la tapa del objetivo.
3. Coloque el interruptor Power en
3
CAMERA.
Abra la pantalla LCD.
I
Coloque el interruptor Mode en
I
TAPE. Asegúrese de que aparece
STBY.
39
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sc-d455Sc-d457

Tabla de contenido