Boston Acoustics MC200Air Manual Del Propietario Y De Seguridad página 9

Ocultar thumbs Ver también para MC200Air:

2 Quickly press and release the

router. Note: The WPS button may be on the front, top or back of the router. On some routers, the WPS

button may be labeled with a symbol. See the instructions for your router to identify the WPS button.

Then, when the

button changes from blinking orange to being lit green, a connection is established. This

may take a couple of minutes.

If there is a connection failure the

section for more information.

You may want to change the name assigned to the MC200Air. For example, if you have more than one

MC200Air in your home, you'll want to be able to know which system you are using. See the following section,

and follow steps 1-4 and 8 to change the name. Note: If you change the name assigned to your MC200Air, it

will remember all previously established connections.

Option 2 – System Setup Using Wi-Fi

Note: The screen images shown are those for the versions of the Mac iOS or Windows that were current at the

time of publication.

1 Disconnect the power cord from the back of the MC200Air for about 10 seconds. Reconnect the power cord

to the MC200Air. Press the

go to the next step.

2 Press and hold the

buttons blink orange. The

green, then go to the next step. Note: During the entire Wi-Fi network setup process, the

blink orange

3 Click on the "Wi-Fi Selection" icon in your computer tool bar, or locate the Wi-Fi configuration app for your

iOS device. Turn on Wi-Fi if it is off. Select "MC200Air_Setup" from the list of available networks.

Note: Sometimes it may take up to a minute for "MC200Air_Setup" to appear as a choice in the list of

available networks.

Examples of Wi-Fi Selection Windows

Macintosh OSX

All manuals and user guides at all-guides.com

button the back of the MC200Air. Then press the WPS button on your

button lights red. Try the process again, and also see the Troubleshooting

button. If the

button is flashing orange, wait for it to light solid green, then

button on the back of the MC200Air for about 5-8 seconds – until the

button will flash orange while the system reboots. Wait for it to turn solid

Windows 7

and

button will

iOS on iPhone