Grundig VCP 5030 Manual Del Usuario página 32

CLEANING_AND_MAINTENANCE_____________
Remove the cyclone cone by
turning it in the direction of the
arrow and remove the dust on it.
Once dry, push the cyclone
cone in the direction of the
arrow and fix it together.
2
1
To attach the dust container
to the body, place the dust
container locking tab into the
slot inside the body.
32 ENGLISH
Remove the cyclone pipe and its
holder.
Turn the cyclone cone in the
direction of the arrow and
replace it.
Remove the exhaust filter cover
by turning it in the direction of
the arrow.
After washing under running
water, leave it to dry for at least
24 hours.
Install the motor input filter to the
cyclone cone and place it into
the dust reservoir.
1
2
Gently shake the exhaust filter
to clean the dust, wash it under
running water for and leave it to
dry for at least 24 hours.
1
2
24h
1
2
24h