Installing The Rescue - NEO Rescue Backpack Manual Del Usuario

EN

INSTALLINg THE rESCUE

1- Place the inner container inside the rescue container overlapping the 2 arrows printed
on the rescue container and the inner container. Place the handle on the velcro.
2- Install the rescue Y bridles using the straps and their bridle covers.
Fasten the ends using the blue links.
32
3- Slide the zippers to the beginning (eyelet end).
4- Use the 2 plastic wires supplied to close the container by routing the loops through
the 2 eyelets.
5- Close the 2 zippers.
EN
33