Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using your iron, basic safety precautions should always be followed,
including the following:
❍ READ ALL INSTRUCTIONS BEFORE USING
❍ Use iron only for its intended use.
❍ To protect against a risk of electric shock, do not immerse the iron in
water or other liquids.
❍ The iron should always be turned to the minimum (min) setting
before plugging or unplugging from outlet. Never yank cord to
disconnect from the outlet; instead grasp plug and pull to disconnect.
❍ Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
❍ Always disconnect iron from electrical outlet when filling with water
or emptying, and when not in use.
❍ Do not operate iron with a damaged cord, or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron; take it to a qualified service person for
examination and repair, or call the appropriate toll-free number
on the cover of this manual. Incorrect reassembly can cause a risk
of electric shock when the iron is used.
❍ Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected or on an
ironing board.
❍ Burns can occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down or use the
surge of steam – there may be hot water in the reservoir. Avoid rapid
movement of iron to minimize hot water spillage.
❍ The iron must not be left unattended while it is connected to the
supply mains.
❍ The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
❍ The iron must be used and rested on a stable surface.
❍ When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
❍ The iron is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
2
All manuals and user guides at all-guides.com