General; Local Value Of The Assembly/Operating Manual; Intended Use; Improper Use - Hammerbacher VXMST Instrucciones De Montaje

General

Local value of the assembly/operating manual

The guiding principle for safe use and trouble-free operation of this workstation is knowledge of basic safety
information and regulations.
This assembly/operating manual contains the most important information needed for assembling and
operating the workstation frame safely.
regulations applying to accident prevention in the locality in the workstation frame is to be used must be
observed at all times.
Keep the assembly instructions and safety instructions in a safe place!

Intended use

ces or other enclosed areas. The table must be used for this purpose only. Any other use than the above
shall be deemed improper. Please observe the provisions of Section "Safety Information". Children may be
unaware of the dangers presented by the workstation if unsupervised. The manufacturer can in no way be
held liable for damage arising from improper use.
Intended use shall also include:
• Observation of all information from the assembly/operating manual and
• Prohibition of any sort of addition to/conversion of the workstation.

Improper use

• Never use the workstation to lift people or loads!!!
• Do not exceed the maximum load of the workstation frame (see assembly instructions).
Laws, directives and standards to be observed
• Machinery Directive 2016/42/EG
• Low Voltage Directive 2014/35/EU
• Electromagnetic Compatibility Directive 2004/30/EU

FCC information for class B digital device (power supplies)

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
one more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
Safety information

Symbols/warnings

The Operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for
any person's life or health. Failure to adhere to such information may have
serious consequences for health, or could even result in life-threatening
injury or death.
This symbol indicates important information. Failure to adhere to such
information could lead to damage to the workstation.
Do not place objects or parts of the body under the workstation frame or between
the cross members.
This could cause serious injury or even result in death.
Do not exceed the maximum permitted load on the workstation frame.
max. XX kg Overloading could lead to breakage and serious injury as a consequence - take a
look at the assembly instructions.
This symbol warns of dangerous electrical voltage in
enclosed spaces.
Use the table only indoors.

Safety measures

• Keep the assembly/operating manual in the place where the workstation frame is used at
all times.

Note for those assembling the workstation

• Assembly may only be carried out by skilled personnel.

Transport

• Only move the table frame when it is disconnected from the power supply
(pull out the mains plug).
• Only move the table frame with two people and at the lowest table height.
•

Safety/protective measures

• This appliance can be used by children aged from 8 years and above and persons with
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be carried out by children
without supervision.
•
English
5