Operation And Indicators; Correct Position Of Seat - Hammerbacher VXMST Instrucciones De Montaje

Operation and indicators

Observe the regulations and safety instructions in particular:
• Make sure that there is enough space to avoid collisions.
Indicators
• Leave the immediate surroundings of the workstation at once if it starts to
move spontaneously. Under no circumstances attempt to operate the workstation frame.
Have the workstation frame repaired by specialists.
Refrain from using the workstation until it has been successfully repaired.
• Stop using the workstation frame at once if you notice anything unusual
• Have the workstation repaired by specialists. Refrain from using the workstation until it has been
successfully repaired.
Stop using the workstation at once if its safety features fail to work as they should.
•
8

Correct position of seat

an uncomfortable siting posture. If you feel that the following advices leads you to an uncomfortable siting
posture simply adapt your needs.
•
• Siting properly requires that your lower back touches the back rest.
If possible align the seating depth in order to avoid pressure from the seat
pan to your lower leg.
• Sit upright but lean back in a relaxed position.
•
when your arms are touching the arm rest.
Desk
•
posture.
• Your elbows should be angled by 90 - 120° when your arms rest on the table top.
The edge of the top should not press against your arms.
Equipment on the desk
• Incident light (day light or lamps) on your monitor should approach the surface of your screen by an
angle of 90°.
•
downward while focusing the centre of your screen.
• Please keep a distance of 60 - 70 cm from your screen.
•
• Please heed the advice in the manuals of your further (ergonomical) equipment.
English
9