Klarstein MIGHTY MINCE Manual Del Usuario página 20

EN
20
Place the desired perforated disc (fine, medium or coarse) on the cutting blade
(9), fitting the elevations to the slot (see figure 5).
Hold the perforated disc with one hand while tightening the fastening ring (13)
with the other hand (see figure 6). Do not overtighten the fastening ring (13).
Attach the hopper plate (6) to the top
of the filler tube.
Place the appliance on a stable
surface. The air outlet at the bottom
and the side of the motor housing
should be kept free and not blocked.