Assembly - Klarstein MIGHTY MINCE Manual Del Usuario

EN

ASSEMBLY

Press the fasten button, hold the head (7) and insert it into the inlet (4) of the
motor housing. When inserting it, make sure that the head (7) is slightly tilted
(see direction of arrow in figure 1). When you have inserted the head (7), turn it
anticlockwise until it is firmly seated (see figure 2).
Insert the worm shaft (8), long end first, into the head (7). Turn the worm shaft
(8) slightly until it is seated in the motor housing (see figure 3). Place the cutting
blade (9) on the worm shaft as shown, with the blade facing forward (see figure
4). If the cutting blade is not fitted correctly, the meat will not be grinded.
19