MOB MO9838 Manual Del Usuario página 3

Option 1: Put the earbuds into the charging box, the earbud will
power off and switch to charging mode automatically. Green led on
when in Charging mode.
Option 2: You can press and hold any of the earbuds' sensor
button for 3 seconds to power off. When 2 earbuds power off, you
will hear the indicating sound: Power Off. The green indicating light
will flash 3 times.
Pairing both earbuds
The 2 earbuds will pair with each other automatically within
5seconds after powering on.
Wireless Connection with Device
After both earbuds are paired with each other, open the Wireless
setting on your Mobile, iPad or other Wireless enabled devices,
search "MO9838", and select it to connect. You will hear
CONNECTED when earbuds connect with your device. Once there
Wireless is connected successfully, the Indicating LED's will turn
to white light flashing slowly. Then you can enjoy music though the
earbuds from your device.
Remarks:
1. After the first time you have connected the earbuds will be
connected with your mobile automatically as long as you power
on the earbud and your mobile "Wireless" is on and MO9838 is
still listed from your BT list of devices.
2. Earbuds will power off automatically if no BT connection within 3
minutes.
3. After both earbuds are paired with each other but not connected
with Wireless devices, please don't press your earbud' sensor
button, it may cause 2 earbuds to unpair, if this occurs please
put the 2 earbuds into the charging box then take out again to
restart them.
Control Button Functions on Earbuds
Playing/ Stop music: When playing music, Short press any
earbud' touching sensor button to Stop/Playing music
Answer call: When call is received short press any earbud'