Craftsman 580.752210 Manual Del Operador página 14

• Select cyan jetflush PrecisionSpray
TM
nozzle for
quick high flow clean up and long reach cleaning of
second story siding and windows.
• Select magenta jet soap PrecisionSpray
TM
nozzleto
launch soap to second story siding and windows.
Select black fan soap PrecisionSpray
TM
nozzle for
general cleaning. Greatfor applying soap to
vehicles, boats, driveways, decks, and patios.
FAN SOAP
3. Pull back on collar, insert new PrecisionSpray
TM
nozzle
and releasecollar. Tug on nozzleto makesure it is securely
in place.
Usage Tips
* For most effective cleaning, keep PrecisionSpray
TM
nozzle
from 8 to 24 inches (20 to 61 cm) away from cleaning
surface.
. If you get PrecisionSpray
TM
nozzle too close, especially
using a high pressure nozzle,you may damage surface
being cleaned.
* DO NOTget closer than 6 inches (15 cm) when cleaning
tires.
2-1N-1 Soap System
CAUTIOH
Chemicals can cause bodily injury, and/or property
damage.
NEVER usecausticliquidwith pressurewasher.
UseONLYpressure washersafedetergents/soaps. Followall
manufacturers instructions.
CJeaningand ApplyingDetergent with the Project Pro@
PerfectMJx
TM
Siphon
To apply undiluted detergent using the
blue PeffectMix
TM
siphon, follow these
steps:
1. Review use of PrecisionSpray
TM
i
nozzles.
2. Attach PerfectMWMsiphon hose to
pump and PerfectMix
TM
concentrate
ii'i"
bottle, ti
NOTICE
Contact with the hot muffler can damage detergent
siphoning tube.
Wheninsertingthe siphoninto a detergent s olutionbottle,
routethe tubeso asto keepit from inadvertently contacting the
hot muffler.
3. Make sure fan soap (black) or jet soap nozzle (magenta)
is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles (Cyan,Orange or Red).
4. Make sure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
NOTICE
You must attach all hoses before you start th_
Startingthe engine without all the hosesconnected andwithout
thewaterturnedONwill damage the pump.
Damage to equipment r esultingfrom failureto followthis
instructionwill void warranty.
5. Start engine following instructions How to Start Your
Pressure Washer.
6. Apply detergent to a dry surface, starting at lower
portion of area to be washed and work upward, using
long, even, overlapping strokes.
7. Allow detergent to "soak in" for 3-5 minutes before
washing and rinsing. Reapply as neededto prevent
surface from drying. DO NOT allow detergent to dry on
(prevents streaking).
14