Programming Track Numbers - Philips AZ 1018 Manual Del Usuario

Programming track numbers

You may store up to 20 tracks in the
desired sequence. If you like, store any track
more than once.
1 In the STOP mode, press SEARCH ∞ or
§ for your desired track.
2 When your chosen track number appears,
press CD MODE/ PROGRAM once to
store the track.
The display shows
'P ro g' briefly followed by your selected
track number.
If you attempt to programme without
first selecting a track number, no SEL
is shown.
3 Repeat steps 1 to 2 to select and store all
desired tracks in this way.
FULL is displayed if you attempt to
programme more than 20 tracks.
4 To play your programme, press
PLAY•PAUSE 2;.
All manuals and user guides at all-guides.com
and
PROGRAM
Reviewing your programme
• In the STOP mode, press and hold down
CD MODE/ PROGRAM for more than
one second.
The display shows all your stored track
numbers in sequence.
Erasing a programme
You can erase the contents of the memory
by:
– opening the CD door;
– selecting RADIO or TAPE source;
– pressing STOP 9 (twice during playback
or in the stop position.)
Display: shows ' no P ro g' briefly when
the programme is cancelled.
CD-Player
11