Kinderkraft XPEDITION Manual De Uso página 54

headrest, gently pull the handle upwards. Adjust the headrest to the desired height. When
you have already adjusted height, release the adjusting handle, the headrest will be locked
in a selected position.
• Lower height of the headrest by pressing height adjustment handle (6). When you have
already adjusted height, release the adjusting handle and the headrest will be locked in a
selected position.
Place the child safety seat on the car seat. Put the child in the safety seat and check headrest
height. To set a suitable height of shoulder belts, make sure the belt enters the safety seat
backrest slightly above or at the level of child's arms. Make sure the shoulder belts fit child's
arms well (fig. A.1.d).
NOTE! If necessary, re-regulate height of the headrest until you reach an optimal height of
shoulder belts.
For II and III weight groups, when your 5-point safety belts are hidden and you use 3-point
safety belts for adults, to set height of the headrest:
• Grab the headrest adjustment handle (6) at the back of the headrest. If you wish to lift the
headrest, gently pull the handle upwards. Adjust the headrest to the desired height. When
you have already adjusted the height, release the adjusting handle and the headrest will be
locked in a selected position.
NOTE! If necessary, slacken hidden 5-point safety belts to freely adjust height of the headrest.
• Lower height of the headrest by pressing the height adjustment handle. When you have
already adjusted height, release the adjusting handle and the headrest will be locked in a
selected position.
NOTE! Remember to gently tighten hidden 5-point safety belts (8) with the adjusting strap
until safety belts rest flat on the child safety seat backrest.
Place the child safety seat on the car seat. Put the child into the safety seat and check height
of the headrest. The shoulder belt must go between child's arm and neck. A correctly
positioned headrest assures optimal arrangement of the shoulder part of the car belt and
provides the child with protection and comfort (fig. A.1.3).
NOTE! If necessary, re-regulate height of the headrest until you reach an optimal height.
4.2 How to adapt backrest / regulate backrest inclination
• You can change child safety seat inclination angle (fig. A.1.4) with a lever (11). Pull the lever
and then slide the seat. Release the lever in a desired position. Gently move the seat until you
can hear a clear „click" - the seat has been secured in a specific position.
NOTE! In 0+ and I groups (up to 18kg) with the child safety seat in a rear-facing position, you
need to use position „1" - lying (fig. A.1.1).
In I group (9kg-18kg) and II and III groups (15kg – 36kg) with the child safety seat in a forward-
facing position, you can use positions from „1" to „4". (fig. A.1.2).
4.3 How to secure the child with 5-point safety belts
• Slacken safety belts by pressing the button (9) and pulling them.
Remember! Do not pull shoulder cushions.
54