Publicidad
All manuals and user guides at all-guides.com
OBJ_BUCH-0000000347-001.book Page 15 Thursday, December 20, 2018 8:37 AM
Symbol, character
Explanation
Low oscillation rate
High oscillation rate
Maximal allowed oscillation rate
Character
Unit of measure-
ment, international
U
V
-1
n
/min, min
S
r/min
°
kg
L
dB
pA
L
dB
wA
L
dB
pCpeak
K...
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual as well as the enclosed "General
Safety Instructions". The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Intended use of the power tool:
Hand-guided oscillator for sanding small surfaces, corners
and edges, for sawing thin parts of steel sheet, wood and
plastic, for scraping, polishing, rasping, cutting and sepa-
rating without water in weather-protected environ-
ments, using the application tools and accessories
recommended by Berner.
Special safety instructions.
Hold the power tool by the insulated gripping surfaces
when performing operations where the application tool
could contact hidden wires. Contact with a "live" wire
will also make exposed metal parts of the power tool
"live" and shock the operator.
Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. Holding the
Unit of measure-
Explanation
ment, national
V
Rated voltage
, rpm,
/min
Rated oscillation rate
°
Oscillation angle
kg
Weight according to EPTA-Procedure 01
dB
Sound pressure level
dB
Sound power level
dB
Peak sound pressure level
Uncertainty
2
m/s
Vibrational emission value according to EN 62841
(vector sum of three directions)
m, s, kg, A, mm, V,
Basic and derived units of measurement from the
W, Hz, N, °C, dB,
international system of units SI.
2
min, m/s
work by hand or against your body leaves it unstable and
may lead to loss of control.
Do not use accessories which are not specifically
designed and recommended by the power tool manufac-
turer. Safe operation is not ensured merely because an
accessory fits your power tool.
Grasp the power tool in such a safe manner that your
body never comes into contact with the application tool,
especially while working with application tools such as
saw blades or other blades pointed toward the grasping
range. Touching sharp tips or cutting edges can lead to
injuries.
Wear personal protective equipment. Depending on appli-
cation, use face shield, safety goggles or safety glasses.
Where appropriate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stopping small
abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by
various operations. The dust mask or respirator must be
capable of filtrating particles generated by your opera-
tion. Prolonged exposure to high intensity noise may
cause hearing loss.
Do not direct the power tool against yourself, other per-
sons or animals. Danger of injury from sharp or hot
application tools.
Do not rivet or screw any name-plates or signs onto the
power tool. If the insulation is damaged, protection
against an electric shock will be ineffective. Adhesive
labels are recommended.
English - 15
Publicidad
