Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Caulk the Bottom Track
Apply a bead of caulk or sealant in the front groove on the underside of the bottom track.
Apply a second, smaller bead of caulk or sealant to the other edge on the underside of the bottom
track.
Install the bottom track on the ledge at the marked location.
5. Install the Wall Jambs
Place a wall jamb over the bottom track. Align the holes in the wall jamb with the holes in the wall.
NOTE: The top and bottom screws should be inserted through bumpers before being installed. Do not
overtighten the screws or damage to the bumpers may occur.
Secure the wall jamb to the wall with three #8-18 x 1-1/2" panhead screws.
Repeat the procedures with the other wall jamb.
1034041-2-A
Caulk Here
Bottom
Track
Bumper
#8-18 x 1-1/2"
Panhead Screw
8
Sterling
Publicidad
Tabla de contenido
