Sony ZS-M35 Manual De Instrucciones página 44

Erasing recordings (Erase Function) (continued)
Note
you stop recording,
do not disconnect the
mains lead or move
the player while "TOC
EDIT" is flashing in
the display. If you do
so, recording may not
be done properly.
GB
44
Editing recorded tracks on the MD
Erasing all tracks on an MD
You can erase the disc name, all recorded tracks and
After
their names at the same time. After you have erased
all tracks on the MD, you can use it as a new MD.
1
While the player is stopped, press EDIT repeatedly
until "All Erase" appears in the display.
2
Press YES•ENTER.
"ALL Erase OK?" appears in the display. Once you
have erased tracks, you cannot recover them. Be
sure to check the contents of the disc you are
trying to erase.
If you want to cancel the erase function at this
point:
Press NO•CANCEL or MD x.
3
Press YES•ENTER.
After "TOC EDIT" disappears from the display,
"Blank Disc" appears in the display, and all
contents on the MD are erased.