Setting Up The Wifi Adapter; Use As A Wifi Client Adapter - Rational iCombi Pro SelfCookingCenter Manual Del Usuario

en
6. Plug in the Ethernet cable to the inside
of the control panel or to the outer
Ethernet port [
7. Guide the cable out of the unit. Roll up
the cables outside the unit.
8. Place the WiFi adapter in a suitable
position [ Photo
>
The WiFi adapter can be glued or
screwed at selected positions. We
recommend mounting it on the
side of UltraVent hoods (1), in the
centre on the rear of the base
frames (2) or on the wall (3).

4.2 Setting up the WiFi adapter

DANGER
High voltages when connecting to the
mains power
Danger to life due to high voltage.
Working on the switched-on unit
n
with the electrical compartment
open may only be carried out by
trained personnel.
Working on the switched-on unit
n
may only be carried out with
appropriate protective clothing.

4.2.1 Use as a WiFi client adapter

a The electrical compartment is open.
a The unit is switched on.
1. Connect the Ethernet cable of the WiFi
adapter to a computer.
2. Note that the WiFi on the computer is
disabled during the configuration.
14 / 108
Photo 11].
12].
80.51.855_iCombiPro-iCombiClassic-SCC_WiFi-Adapter_IM_EU-
Logging in
1. Open a web browser and enter the ad-
dress https://192.168.11.1 or another
previously set IP address. Accept the
necessary certificates.
2. Enter the username and password. By
default the username is root and the
password is Rational [
>
Press the Login display text.
NOTICE
Change initial password to avoid
misuse
When configuring the unit for the first
time, set a new password in the
System / Administration menu.
Connect the adapter to a WiFi access
point
NOTICE
Network type for connection must be
observed
The WiFi adapter cannot be used in a
captive portal (e.g. a guest WiFi) or a
WPA2 Enterprise based WiFi network.
1. In the Network / WiFi menu, press the
Search [
Photo
2. Select your chosen network. Confirm
the network with the Join network
display text.
3. Enter the WiFi password in the WPA
key input line [
the entry with the Submit display text.
4. Confirm the entry with the Save dis-
play text.
5. Confirm with the Save & Apply display
text.
4 | Installation
Photo 13].
14] button.
Photo 15]. Confirm
west