Use As A Repeater To Expand Existing Wifi Coverage - Rational iCombi Pro SelfCookingCenter Manual Del Usuario

4 | Installation
>
The signal strength of the selected
WiFi is shown in the overview
[ Photo 16]. If the password is
entered incorrectly, 0% appears in
the overview. The process must be
repeated from Point 1. The settings
can be changed by pressing the
Edit button.
6. Carry out a test. Open a web address
of your choice in your browser.
7. Connect the Ethernet cable to the Eth-
ernet interface on the Combi-steamer.
8. Close the electrical compartment.
9. Activate DHCP in the network settings
of the combi-steamer.
10. Restart the Combi-steamer.
>
The unit is connected to the WiFi.
11. Activate the ConnectedCooking op-
tion in the Combi-steamer settings.
>>
You will receive an activation code to
register the unit in ConnectedCooking.
Further information on Connected-
Cooking can be found in the Connec-
tedCooking manual.
4.2.2 Use as a repeater to expand
existing WiFi coverage
NOTICE
Repeater mode requires permanent
power supply
To use the Repeater mode, the unit
must be switched on with the
connected WiFi adapter.
80.51.855_iCombiPro-iCombiClassic-SCC_WiFi-Adapter_IM_EU-
west
NOTICE
Number of units connected in
Repeater mode
Only a limited number of units can be
connected in Repeater mode with the
WiFi adapter:
iCombi Pro: max. 10 units
n
SelfCookingCenter®: max. 5 units.
n
In this operating mode, the WiFi adapter is
used to expand the coverage of an existing
WiFi network. The WiFi adapter provides
its own wireless network in addition to the
existing network. This has a separate SSID,
a separate password and provides ad-
dresses from the address range
192.168.2.2 - 192.168.2.254 using its
own DHCP service.
Pre-requisites
a The electrical compartment is open.
a The unit is switched on.
a The settings for
adapter have been made.
1. Connect the Ethernet cable of the WiFi
adapter to a computer.
2. Note that the WiFi on the computer is
disabled during the configuration.
Logging in
1. Open a web browser and enter the ad-
dress https://192.168.11.1 or another
previously set IP address. Accept the
necessary certificates.
2. Enter the username and password. By
default the username is root and the
password is Rational [
>
Press the Login display text.
} Use as a WiFi client
Photo 13].
15 / 108
en