Change Ip Address; Testing The Wifi Adapter - Rational iCombi Pro SelfCookingCenter Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
en
Configuration
1. In the Network / WiFi menu, press the
Add [
Photo
2. Enter the name for the expanded WiFi
in the ESSID field [
>
Access point must be set as Mode .
3. Select WiFi encryption tab. Select the
buttons to the right of the password
field to make the default password vis-
ible [
Photo
19]. Take a note of the
password in a safe place. Confirm the
entries with the Save display text.
>
A new network appears in the WiFi
overview [
4. Confirm with the Save & Apply display
text.
5. Test the connection. Unplug the Ether-
net cable and connect the laptop to the
new WiFi. Enter the SSID and the
password noted down in the previous
step in full.
>
A website can be opened.
6. Connect the Ethernet cable in the
Combi-steamer.
7. Close the electrical compartment.
>>
The WiFi created can be used by other
WiFi adapters and Combi-steamers in
WiFi client mode. To do this, the con-
figuration must be carried out with the
SSID created and the password noted
down.
16 / 108
17] button.
Photo
18].
Photo
20].
80.51.855_iCombiPro-iCombiClassic-SCC_WiFi-Adapter_IM_EU-

4.2.3 Change IP address

NOTICE
Connection test fails despite sufficient
signal strength
If the WiFi adapter has the same IP
address as the access point, the
connection test will fail, despite good
signal strength and correct
configuration settings for the WiFi
network.
Resolve the IP address conflict:
Check the IP address set on the
n
access point.
Change the IP address set on the
n
WiFi adapter.
1. Log into the menu.
2. Set a different IP address in the main
menu under Menu - System - LAN IP
address .
3. Follow the instructions on the screen.
>
Use the newly set IP address to ac-
cess the web interface of the WiFi
adapter.
>>
Repeat the connection test.

4.2.4 Testing the WiFi adapter

NOTICE
Test the connection of the WiFi
adapter. If incorrect settings have been
made, the settings must be adjusted or
the WiFi adapter reset.
Use the magnet (reed contact) to
n
reset the WiFi adapter.
4 | Installation
west

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Icombi classic selfcookingcenter

Tabla de contenido