Connecting To The 15000 / 23000 Appliances Cli - Check Point 15000 Serie Guía De Introducción

Connecting to the 15000 / 23000 Appliances CLI

To connect to the command line interface of the 15000 / 23000 Appliances, use one of
these:
•
An SSH connection to the management interface (if SSHD is configured).
•
A serial console cable and terminal emulation software, such as PuTTY (from
Windows) or Minicom (from Unix/Linux).
15000 / 23000 Appliances support these serial console connectivity options:
• Mini USB - Using the included mini USB to USB console cable
• RJ45 - Using the included DB9 DTE to RJ45 serial console cable
Connection parameters for 15000 / 23000 Appliances are: 9600bps, 8 bits, no
parity, 1 stop bit (8N1), Flow Control - None.
If you use both the mini USB and RJ45 console ports, the mini USB port has
priority. To use the RJ45 port, disconnect the mini USB console cable.
When you have completed using the RJ45 port, reconnect the mini USB console
cable.
Note - To use the mini USB console port, a driver must be installed on the
console client machine (desktop/laptop). For installation instructions and
the download link, see the appliance home page
http://supportcontent.checkpoint.com/solutions?id=sk107516.
Check Point 15000 and 23000 Appliances Getting Started Guide
Configuring 15000 / 23000 Appliances
| 33