Remote Control Keys - Philips 21PT4420/01 Manual Del Usuario

All manuals and user guides at all-guides.com

Remote control keys

Screen information
To display / clear the program
number and time remaining for the
sleeptimer. Press the key for 5
seconds to activate permanent
display of the number.
VCR key *
Keys not used
Pre-set sound
Used to access a series of stored
settings: , ,
Voice Music Theatre
Menu
To call up or exit the menus.
Cursor / Format 16:9
These 4 keys are used to navigate
îÏ
through the menus.The
keys are used to enlarge or
compress the picture vertically.
Volume
To adjust the sound level
Mute
To mute or restore the sound.
Number keys
Direct access to the programmes.
For a 2 digit program, enter the 2nd
digit before the dash disappears.
Selection of EXT socket
Press several times to select the
connected equipment.
VCR key *
Press and hold down the VCR key,
then press one of the keys to access
the main functions of the VCR:
b H îÏ È¬
% ∫
@ # · ¢ Ê Æ 09
P
The remote control is compatible with
all VCRs using the RC5 standard.
Teletext
Teletext call
c
Press the key to call teletext, change to transparent
mode and then exit.The summary appears with a list of
items that can be accessed.
If the channel selected does not broadcast teletext, the
screen remain black.
Selecting a page
Enter the number of the page required using the
9 @ P #
or keys (always 3 digits).The number is
displayed top left, the counter turns and then the page is
displayed. Repeat this operation to view another page.
If the counter continues searching, the page is not transmitted.
Direct access to the items
Coloured areas are displayed at the bottom of the
4
.
screen.The 4 coloured keys are used to access the
items or corresponding pages.
Contents
Press
Temporary stop
Press
display.
0
to Enlarge a page
Press
Stop sub-page acquisition
Certain pages contain sub-pages which follow on
automatically. Press
Hidden information (games solutions)
Press
Standby
Lets you place the TV set on
standby.To turn on the TV, press
@ # b 0
, ,
P
Teletext and VCR keys
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
16:9 format
To enlarge or compress the picture
vertically
Pre-set image
Used to access a series of stored
settings: ,
Rich Natural
and return to
Multimedia
Teletext call
Program selection
To access the next or previous
programme.The number is
displayed for a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Teletext and VCR keys
Sound mode
Used to force programmes in
(or
Stereo Nicam Stereo
or, for bilingual programs, to
choose between
The indication is red when in
Mono
forced position.
d
to return to the contents page (usually page 100).
r
to temporarily disable or activate the teletext
x
several time to enlarge the page.
s
to stop / resume the sequence.
y
to display or hide the concealed information.
9
to .
, ,
Soft
.
Personal
) to
Mono
or .
Dual I Dual II