Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble or fault
The product runs but
the screw cannot be
turned.
Running speed sud-
denly drops consid-
erably.
The battery runs
down more quickly
than usual.
The battery doesn't
engage with an audi-
ble click.
Product or battery
gets very hot.
10
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping
gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical
tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local gov-
ernmental garbage disposal or public health and safety resources for
disposal instructions.
Most of the materials from which Hilti products are manufactured can
be recycled. The materials must be correctly separated before they can
be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales
representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
*2293285*
Possible cause
The wrong direction of
rotation is set.
Low battery.
Battery state of health
not optimal
The retaining lug on the
battery is dirty.
Electrical fault
2293285
Action to be taken
▶ Use
the
forward/reverse
switch to set the
correct direction of
rotation. → page 13
▶ Charge the battery.
→ page 11
▶ Call up the bat-
tery's state of health.
→ page 9
▶ Replace the battery, if
necessary.
▶ Clean the retaining lug
and push the battery
in until it engages.
▶ Switch the product off
immediately, remove
the battery and con-
tact Hilti Service.
English
17
Publicidad
Tabla de contenido
