Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. Position the screw on the bit and bring the tip of the screw into contact
with the working surface.
3. Use the control switch to regulate the speed of the screwdriver.
Turn the depth gauge counter-clockwise to increase the depth to
which the screw is driven.
Turn the depth gauge clockwise to reduce the depth to which the
screw is driven.
6.2 Removing screws
1. Pull the depth gauge off.
2. Set the product to reverse rotation.
3. Insert the bit into the head of the screw and use the control switch to
regulate the speed of the product.
4. Refit the depth gauge after removing the screws.
6.3 Switching on in sustained operating mode
1. Press the control switch and hold it in this position.
2. In addition, press the lockbutton for sustained operation.
6.4 Switching off after sustained operation
▶ Press the control switch.
▶ The lock button returns to its original position.
6.5 Product / depth gauge interface
1. Pull the depth gauge away from the power tool, releasing the snap-on
connection.
2. Pull the depth gauge forward and off the product.
With the drive spindle exposed in this way, the following operations
can be carried out:
removing screws (set to reverse rotation),
changing bits,
changing bit holders,
changing to magazine operation,
redriving screws.
7
Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
14
English
6
7
2293285
*2293285*
Publicidad
Tabla de contenido
