Tabla de contenido
Publicidad
ESPECIFICACIONES DE INSTALACIÓN (continuación)
Drawing Title: MCSG-B-159-4000-07
INSTALACIÓN EN LA PLACA DE EYECCIÓN
L
NOTES:
1.
CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2.
EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN 0.030" [0.76] OR
10% OF EJECTOR PIN DIA, WHICHEVER IS SMALLER.
3.
ENCLOSED EJECTOR BOX SUGGESTED.
4.
DO NOT SCALE PRINT
5.
BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6.
DIMENSIONS IN INCHES [MM], UNLESS NOTED
7.
TOLERANCES UNLESS SPECIFIED:
XXX = 0.003 [0.08]
XX = 0.01 [0.3]
20
RJG, Inc.
ANGLES = 3 30
Multi-Channel Strain Gage 4,000 lb. Sensor (MCSG-B-159-4000) Installation—Ejector Plate Installation
L
SECTION L-L
SCALE 1 : 3
SG-8 Sensor Connector
Sensor de Botón de 4.000 Libras con Galga Extensométrica Multicanal Lynx™ MCSG‑B‑159‑4000 | Manual del Producto
Top of Mold
Description: MCSG-B-159-
4000 Sensor Installation
Drawn: K.J.Brettschneider
Design:
Check: M.Groleau
Date: 12.02.2021
Publicidad
Tabla de contenido
