Technical Data - DeWalt XR LI-ION DCG412 Manual Del Usuario

CORDLESS GRINDER
DCG412
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
No-load/rated speed
Wheel diameter
Spindle diameter
Spindle length
Weight (without battery pack)
* weight includes side handle and guard
Noise values and vibration values (triax vector sum) according to
EN 60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the
WA
given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
NOTE: Applications such as cutting-off or wire
brushing may have different vibration emissions.
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
DCG412
V 18
DC
2/10
W 405
Battery pack
min -1 8000
Battery type
mm 125
Voltage
M14
Capacity
mm 16
Weight
kg 1.9*
Battery pack
Battery type
Voltage
Capacity
dB(A) 84
Weight
dB(A) 95
Charger
dB(A) 3.5
Mains voltage
Battery type
Approximate
m/s² 7.1
charging time
m/s² 2.2
of battery packs
Weight
Charger
Mains voltage
Battery type
Approximate
charging time
of battery packs
Weight
Fuses
Europe
U.K. & Ireland
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
DCB180 DCB181
Li-Ion Li-Ion
V 18 18
DC
A 3.0 1.5
h
kg 0.64 0.35
DCB183 DCB184
Li-Ion Li-Ion
V 18 18
DC
A 2.0 5.0
h
kg 0.40 0.62
DCB105
V 230 V
AC
Li-Ion
min 25 30
(1.3 Ah) (1.5 Ah)
55 70
(3.0 Ah) (4.0 Ah)
kg 0.49
DCB107
V 230 V
AC
Li-Ion
min 60 70
(1.3 Ah) (1.5 Ah)
140 185
(3.0 Ah) (4.0 Ah)
kg 0.29
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
ENGLISH
DCB182
Li-Ion
18
4.0
0.61
DCB185
Li-Ion
18
1.3
0.35
40
(2.0 Ah)
90
(5.0 Ah)
90
(2.0 Ah)
240
(5.0 Ah)
49