English (Original Instructions); Technical Data; Definitions: Safety Guidelines - DeWalt D28117 Traducido De Las Instrucciones Originales

EnGLIsh
ANGLE GRINDERS
D28117, D28137
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power input
No-load speed
Rated speed
Wheel diameter
Spindle diameter
Spindle length
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a =
h,DS
Uncertainty K =
Polishing
Vibration emission value a =
h,P
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
24
WALT one of the
e
D28117 D28137
230 230
V
AC
V 230/115 –
AC
3 2
W 1100 1500
-1
min 2800–10500 2800–10500
min -1 10500 10500
mm 115 125
M14 M14
mm 16 16
kg 2.5 2.7
dB(A) 89 91
dB(A) 100 102
dB(A) 3 3
m/s 2 5.5 9.0
m/s 2 13.5 1.5
m/s 2 3.5 4.5
m/s 2 1.5 1.6
m/s 2 3.2 4.1
m/s 2 1.5 1.5
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools
EC-Declaration of Conformity
Machinery Directive
Angle Grinders
D28117, D28137
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
02.05.2016
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
10 Amperes. mains
13 Amperes. in plugs
WALT at
e
WALT.
e