Dell PowerVault 725N Manual Del Usuario página 16

JO525bk0.book Page 10 Monday, January 27, 2003 12:29 PM
2
F i g u r e 1 - 6 .
3
4
5
6
1-10
Rack Installation Guide
All manuals and user guides at all-guides.com
Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange's top
and bottom holes to secure the slide assembly to the front vertical rail (see Figure 1-6).
I n s t a l l i n g t h e Ve r s a R a i l s S l i d e A s s e m b l i e s
slide assemblies (2)
mounting-bracket flange
10-32 x 0.5-inch
flange-head
Phillips screws
(4 per slide
assembly)
At the back of the cabinet, pull back on the mounting-bracket flange until the
mounting holes align with their respective holes on the back vertical rail.
Install two 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange's
top and bottom holes to secure the slide assembly to the back vertical rail.
Repeat step 1 through step 4 for the remaining slide assembly on the other side of the
rack.
Ensure that the slide assemblies are mounted in the same position on each side of the
rack.
front of rack