NUTRIBULLET BLENDER Manual De Instrucciones página 16

6
Plug the power cord into
an electrical outlet and
POWER
press
the blender.
7
To start blending, select
your speed on the blending
control panel.
NOTE:
Proceed to the blending
control panel chart on page 18
for speed definitions.
16
to turn on
NOTE:
If you need to add
additional ingredients while
blending, switch the setting to
LOW
and remove the vented
lid cap from your pitcher lid,
leaving the lid attached. Add
ingredients through the hole
in the top of the lid, followed
by the tamper if necessary.
Replace the vented lid cap, then
increase to your desired speed.
DO NOT
attempt to add items
through the vent hole when
blending hot ingredients.
CAUTION:
Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and/or
possible injury.