W+W 78951 Manual Del Usuario página 7

4.3 Floor attachment ACCESSORY SET-B pit ladder
4.3. See the diagram for the necessary distance between the drill holes.
Diagram (Ladder is leaned against the doorsill)
Pit depth
00cm
20cm
40cm
60cm
80cm
200cm
220cm
240cm
260cm
280cm
If there are no other equal possibilities of holding on to, the ladder must jut
out at least ,0m beyond the exit, according to EN8-20.
4.3.2 Mounting in case of telescopic sliding doors closing to one side and hinged doors
Fix the floor attachment as near as possible to the closing side of the door. The distance
may be at most 30cm.
4.3.3 Mounting in case of centrally closing sliding doors
Fix the floor attachment so that the ladder stands in the middle of the door.
4.3.4 Mark the two drilling holes on the bottom.
4.3.5 Drill the holes with a 4" drill.
4.3.6 For hydraulic lifts seal the dowels with the provided
sealing compound.
4.3.7 Screw the floor attachment to the floor.
Distance between drill holes and edge
46cm
53cm
60cm
68cm
77cm
82cm
89cm
97cm
04cm
cm
© W W 2/205 Version 2
+
5699
7